Certification Services

Service Details:

Many products require CE marking before they can be sold in the EEA ( EU + Iceland, Lichtenstein and Norway). CE marking proves that your product has been assessed and meets EU safety, health and environmental protection requirements. It is valid for products manufactured both inside and outside the EEA, that are then marketed inside the EEA.
To affix the CE marking to your product, you must put together a technical dossier proving that your product fulfils all the EU-wide requirements. As the product’s manufacturer, you bear sole responsibility for declaring conformity with all requirements. Once your product bears the CE marking, you might have to provide your distributors and/or importers with all the supporting documentation concerning CE marking.

HOW TO OBTAIN CE MARKING?

• Identify the EU requirements for your product
• Check whether your product meets the specific requirements
• Check whether your product must be tested by a Notified body
• Test your product
• Compile the technical dossier
• Affix the CE marking and draft a declaration of conformity

The directives often use a series of questions about the nature of your product to classify the level of risk and refer to a chart called “Conformity Assessment Procedures”. The chart includes all of the acceptable options available to a manufacturer to certify their product and affix the CE Marking.

ASK A QUESTION..?SUBMITMINIMAL RISK

Options for products with minimal risk include self certification where the manufacturer prepares a Declaration of Conformity and affixes the CE Marking to their own product.

MINIMAL RISK

Many directives require products/systems with greater risks to be independently certified; this must be done by a “Notified Body”. This is an organization that has been nominated by a Member Government and has been notified by the European Commission. Notified bodies serve as independent test labs and perform the steps called out by directives. They must have the necessary qualifications to meet the testing requirements set forth in the directives. Notified bodies may be a private sector organization or a government agency. Manufacturers may choose a notified body in any member state of the European Union.

Service Details:

ISO originated from the union of two organisations – the ISO (International Federation of the National Standardizing Associations) and the UNSCC (United Nations Standard Coordinating Committee). In 1946 over 25 countries met at the Institute of Civil Engineers in London to create a new international organisation, where the objective was to ‘facilitate the international coordination and unification of industrial standards’ From this, the new organisation ISO began operations in February 1947. The word ISO is derived from the Greek ISOS meaning ‘equal’.

As the International Organization for Standardization would translate differently across different languages, it was decided that the short form name for the organisation would be ISO. Today the ISO has grown to a confederation of delegates representing over 150 countries and has published over 16,500 international standards. They meet on a regular basis to further develop new and existing management standards.

BENEFITS OF CERTIFICATION

Each standard supports its own benefits within every industry. However, the common benefits across the certifications include widened market potential, compliance to procurement tenders, improved efficiency and cost savings, a higher level of customer service, and therefore satisfaction, and heightened staff morale and motivation.

Having a recognized management standard tells your customers that you are serious about their needs. ISO Certification does NOT define the actual quality of your product or service. The standard helps you achieve consistent results and continually improve the process. Thus, if you can make a good product most of the time, this helps you make it all of the time. It’s just good business practices.

QUALITY MANAGEMENT SYSTEM

 

ISO is focused on meeting customer expectations and delivering customer satisfaction, so you must pay attention to the customer.
The ISO certification evaluates whether your Quality Management System is appropriate and effective while forcing you to identify and implement improvements.
Continuous improvement assures your customers benefit by receiving products/services that meet their requirements and that you deliver consistent performance. Internally, the organization will profit from increased job satisfaction, improved morale, and improved operational results (reduced scrap and increased efficiency). Meeting legal and regulatory requirements benefit the community.

Additional Information:

• Delivery Time: 1 Month

Service Details:

All kind of passport reader (passport scanner) needs to get BIS Registration before being sold or import/export to Indian Market. It falls under the standard IS 13252 (Part-1). We provide consultancy services for getting the BIS Registration for your product, during which we guide you regarding all steps & paper works and we take care of all liaison with BIS Office. #AlephINDIA& A single window for all kind of technical certification and Testing Equipment.#BIS#WPC#ETA#TAC#BEE#CE#UL#Ewaste#CPCB#CARE#ISIMark#Hallmark.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Service Details:

The product is under Mandatory BIS Certification as per Indian Standards  IS 9873(Part 9):2017. This standard prescribes the requirements and the methods of sampling and test for  toys.

To ensure the quality and safely use  toys must be testing and certified under the BIS (Bureau of Indian Standards), government of India.

Team Aleph India QMS assists the manufacturers or importers on every step to get their mandatory product certification along with proper testing with all kinds of quality control parameters for better quality and good future.

Service Details:

RoHS(Restriction of Hazardous Substance) : Since the early 21st Century, electronic waste and chemicals use have become more common, like luminescence of radium or the low melting point of 60/40 lead-tin alloy. But about its harmful effects, no one was aware, how its unnecessary exposure was dangerous to human health as well as the environment. As a result, hundreds of thousands of people have developed health problems such as lung cancer, mesothelioma, and asbestosis. The use of hazardous substances gave birth to the Restriction of Hazardous Substance (RoHS) in February 2003 by European Union.

The RoHS directive took effect on 1 July 2006 and was required to be enforced and become law in each member state. RoHS restricted the use of certain hazardous substances in electrical and electronic equipment. Their major motive behind this step is to reduce the use of harmful substances and reduce the environmental effect and health impacts of electronics.

RoHS stands for Restriction of Hazardous Substances, which is also known as the Directive 2002/95/EC. It includes the restrictions for the use of certain hazardous substances in electrical and electronic equipment. RoHS is a WEEE (Waste of Electrical and Electronic Equipment).

In India, demand for electronic products is increasing widely, due to which the environment and human health are in danger. Furthermore, rapidly evolving technologies encourage consumers to discard electronic devices quickly, resulting in an alarming increase in the amount of electronic trash. Keeping this in consideration all the harmful effects of electronic waste, The Ministry of Environment and Forest (MoEF) and the Government of India implemented the Restriction of Hazardous Substance, which in India is known as Electronic waste.

EXEMPTED PRODUCTS UNDER ROHS CERTIFICATION

1. Military and National Defense products
2. Products that do not rely on electricity as their major source of energy
3. Products whose primary function does not necessitate the use of electricity
4. Sub-assembly or component of an exempted product category
5. Products that support micro, small, and medium-sized manufacturing and service firms, as defined by the Micro, Small, and Medium-Sized Enterprises Development Act of 2006.
6. Batteries
7. Radioactive waste

PROCESS OF ROHS CERTIFICATION

1. Documentation Review : Evaluate and confirm the status of the documents, as well as the scope of testing that is required. Bills are reviewed, material declarations for each product and component are created, assembly drawings, conformance certifications, and test results are uploaded to the company's network, and a compliance file is created.


2. Verification : RoHS Certification process starts with the testing. To evaluate the values of the 10 prohibited RoHS chemicals, on-site or XRF testing and/or lab phthalate solvent extraction testing is done to confirm the level of substances whether it is present below the RoHS threshold or not.


3. End Product Analysis : After testing is done, the next step is the on-site inspection of all pertinent manufacturing processes for RoHS compliance. The auditing procedure entails a review of the goods in comparison to the control of forbidden substances, as well as a full factory inspection that includes quality management. Some auditing firms undertake annual follow-ups, which may include sampling in order to check compliance.


4. Grant of Licence : Once the audit completes successfully, a RoHS certificate (also known as Certificate of conformity or Declaration of Conformity) is issued.

Service Details:

TEC: Since the early 2000s, the telecom industry has been swept up in fast liberalization and innovation. Companies in the telecommunications business send data around the globe in the form of words, voice, audio, or video. The three basic sub-sectors of telecommunications are telecom equipment, telecom services, and wireless communication. There are three sub-sectors of telecommunication that are telecom, services, telecom equipment and wireless communication.

Additional Information:

• Delivery Time: 90 days

Service Details:

TEC: Since the early 2000s, the telecom industry has been swept up in fast liberalization and innovation. Companies in the telecommunications business send data around the globe in the form of words, voice, audio, or video. The three basic sub-sectors of telecommunications are telecom equipment, telecom services, and wireless communication. There are three sub-sectors of telecommunication that are telecom, services, telecom equipment and wireless communication.

Additional Information:

• Delivery Time: 90 days

Service Details:

TEC: Since the early 2000s, the telecom industry has been swept up in fast liberalization and innovation. Companies in the telecommunications business send data around the globe in the form of words, voice, audio, or video. The three basic sub-sectors of telecommunications are telecom equipment, telecom services, and wireless communication. There are three sub-sectors of telecommunication that are telecom, services, telecom equipment and wireless communication.

Additional Information:

• Delivery Time: 90 DAYS

Service Details:

Peso Certification : Since British India, PESO Department has been working to administer the explosives. PESO stands for Petroleum and Explosives Safety Organization (PESO). In the 1890s, this department was established as the Department of explosives time of its inception. Its main motive is to regulate the safety of Hazardous substances like petroleum, compressed gases and explosives. We all know how toxic petroleum and compressed gases are, and a single spark coming into contact with them can result in a life-threatening disaster. Compressed gases are a combination of flammable, toxic, oxidizing and corrosive hazards.

For more than a century, the organization has gained legendary status as an association of excellence in areas connected to hazardous material safety in manufacturing/refining, storage, transportation, handling, and usage. Today, the organization works on a variety of topics such as explosives, petroleum, compressed gases, pressure vessels, gas cylinders, cross-country pipelines, LNG, CNG, Auto LPG, CBG, Ammonium Nitrate, flame proof electrical fittings, and so on.

PESO is a Petroleum and Explosive Safety Organization, also known as the Chief Controller of Explosives (CCOE). This organization administer, control and looks after the safety requirement in the Manufacture, importers, exporters, sellers, storage, transport and handling of the explosives, flammable material, Pressure vessels petroleum and compressed gases. It also administers the petrol stations in India. PESO is a regulatory body with an independent status headed by the Department for Promotion of Industry and Internal Trade and Ministry of Commerce and Industry.

PESO Certification outlines the oil and gas sector's obligatory approval system for goods that deal with gases, are employed in the oil industry or must survive extremely corrosive environments. PESO headquarter is in Nagpur, Maharashtra.

MANDATORY LICENSEE / STAKEHOLDERS FOR PESO

Following Licensee/Stakeholders are covered under the PESO Certification

1. Petroleum / Gas Cylinders / SMPV(U) Rules.
2. Explosive ammonium nitrate rules application.
3. Competent person.
4. Degassing and purging under SMPV (U) Rules, 2016.
5. Fabrication certificates for approval fabrication shops under rule 63(2)(i) of petroleum rules, 2002.
6. CNG Cylinder Testing Certificates for approval Gas Cylinder rules, 2016.

SMPV (UNFIRED) RULES FOR PESO CERTIFICATE

SMPV stands for the Static and Mobile Pressure Vessels. Static pressure containers are designed to store linear loads with mass and volume variation that considerably surpass the materials ambient pressure characteristics. The justification for this form of fabrication is based on safety concerns, with a secondary focus on preventing contamination of pure contents. Pressure vessels are designed to hold liquid, gases or vapors at high pressure.

TIMELINE

90 - 100 Days

VALIDITY

Licence is valid for 3 years and must be renewed after that. PESO licences for static pressure vessels are only valid for three years and must be renewed after that

For the import or export of explosives, a licence granted under the Explosives Rules, 2008 is required, and only explosives that are "Authorized" under the Explosives Rules are allowed to be imported/exported.

.

Service Details:

Metrology Packaged Commodities Rules, 2011.

The registration must be applied within 90 days from the date when the import has been commenced.

The compliance of packaging commodity rules has to be done before the goods are imported in India. Under these rules, importer has to ensure that certain mandatory declarations are made on the pre-packed commodities.

Under the packaged commodity rules, certain mandatory declaration like country of origin, manufacturer name and address, importer address, month and year of manufacturing, month and year of import etc. has to be made. The scope of declarations to be made on pre-packed commodity varies from product to product; say declarations to be made on food products will be different from the non-food items.

Importers of pre-packed commodities should obtain the LMPC Certificate before making any import, as it happens most often that custom authorities tends to stop the clearance of goods for want of LMPC certificate, this creates panic situation for importer.